The MA Configuration Tool will be required to set a Morpho MA120 to accept fingerprints and Mifare cards. Please contact Ideco if you do not have the tool.
1) Open The MA Configuration Tool as Administrator.
2) Enter the IP address of the device and click Connect.
3) After successful connection a new window will open.
Click Get File and the device parameter options will display on the left side.
The parameters under bio cntrl need to be set accordingly:
Bypass Authentication – 0
Authentication timeout – 10
Authentication card mode – 1
Authentication PK Contactless – 0
Authentication ID Contactless – 0
Authentication AC ID – FINGER;CARDDATA:REV;KBD;WGDTCLK;
Identification timeout – 5
Nb attempts – 2
Identification 1 – 1